Our Products
 
 
   
 
 
     
  Cultivator Tillers  
  Features :
  • There are nine tines in this tiller mounted in two rows.
  • Each tine is mounted with two strong coil spring which allow the tines to ride over obstructions in the soil without the inconvenience of stopping work to clear the obstacle, thus making it suitable for use in stone and root obstructed soil.
  • The weight of this tiller is little more than the other 9-tine tiller so it can aerate soil to a depth of one feet.
  • The tiller eliminates the use of the plough.
  • In this tiller 2.3/16" reversible shovels are fitted.
  • The front and the rear tines can be spaced as desired for either row crop or general cultivation work because holes in the frame are provided at one-inch interval.
  • Special steel forged tines & High Tensile Bolts used.
  • This tiller is also available with 7, 11, 13 & 15 tines.

cultivator

Folding Cultivator Tillers


Folding Cultivator Tillers are made usually 11, 13, 15, 17, 19, &21 tines and can be supplied as per order. These are made in spring loaded as well as without springs. In spring loaded Cultivators the design is heaving toggle assembly and in direct linkage design, quality consciousness is observed as strength wise. The tines used are forged tines, reversible shovels of H.C. steel and nut & Bolts are of ny lock and of best quality.


FoldingCultivator

SPECIFICATIONS:
9 TYNE 11 TYNE
FRAME 75x40 mm (Channel) 75x40 mm (Channel)
SPRING TYNES 9.5mm WD,50mm OD
27 Coils 50x19 mm (Forged)
9.5mm WD, 50mm OD
27 Coils 50x19 mm (Forged)
PAIRS ANCHOR PIN 50x8mm Flat 25 mm 50x8mm Flat 25 mm
NUTS FRAME BOLT Nylock M 12 x 32 (High Tensile) Nylock M 12 x 32 (High Tensile)
TYNE BOLT LINKAGE 3 POINTSHOVEL 16x90 mm
50x12 mm
8mm EN-45
16x90 mm
50x12 mm
8mm EN-45
LENGTH 2000 mm 2457 mm
WIDTH 712 mm 712 mm
HEIGHT TILLER PIN 533 mm
28mm
533 mm
28mm
WEIGHT 215 Kg. (Approx.) 265 Kg. (Approx.)

 
   
  *The weight and working data contained in the present table are supplied for information only and are not binding. Specification and size can be altered as part of ongoing product modification / improvement.